ESD Floor Runners and Mats:
Aisle-Safe SD and EC
Aisle-Safe Can Be Installed Permanently and Used Immediately
Ask your Staticworx Tech rep for details on dry adhesives with Aisle-Safe.
Aisle-Safe runners can also be installed over old flooring with our dry conductive adhesive
The ideal solution for strategic grounding of aisleways, corridors, and work areas
The only floor runner and matting on the market that has received The ESD Journal Seal of Approval as a static control walking surface. Attractive and durable, this ESD safe runner is ideal as a static free bridge between ESD safe areas. It can be used as runner, floor mat, or even as permanent flooring material.
2 millimeter thickness allows easy rolling of wire shelf carts!
Aisle-Safe’s permanent “static conductive” construction meets any Class 0, DOD 4145.26-M and ANSI/ESD S20.20 requirement. Lay-flat, 2 millimeter thickness allows for easy rolling of chairs and carts without curling.
Meets IBM recommended ohms range for data centers and server rooms.
Protects below 10 volts walking body voltage generation BVG.
For use in: Labs, Data Centers, Server rooms, Electronics Manufacturing, Emergency Communication Applications, Clean Rooms.
| Two-layer, vulcanized conductive rubber with high quality natural and industrial rubber components. |
| 4’ x 5’6”, 4’ x 7’9”, 4’ x 40’. All are 2 mm thick. |
| ASTM F 1344, for solid color, homogeneous tiles and through-mottled tiles as applicable |
| ASTM D 2240, Shore A, not less than 85 |
| Static co-efficient of friction (James Test): ASTM D 2047, equal to or greater than 0.6, ADA guidelines compliance |
| Products shall contain no asbestos |
| ASTM E 648; NFPA 253; NBSIR 75 950 result to be not less than 0.45 watts per square centimeter, Class-1 |
| ASTM E 662, NFPA 258, NBS smoke density, less than 450 |
| Solder burn resistant |
| Products shall not contain halogen. Products shall not contain poly-vinyl-chloride |
| <1.0 x 10 to the sixth resistance to ground when tested according to ASTM F 150 and ESD.S7.1 under >30% relative humidity at room temperature Lifetime conductivity per guidelines of ANSI/ESD S20.20 |
| .025 seconds for Staticworx when tested according to FTM 4046 101 |
| < 20 volts when tested according to ESD STM 97.2 |
| Taber abrasion test, ASTM D 3389, H-18 wheel, 500 gram load, 1000 cycles, gram weight loss not greater than 0.70 |
| < 1.0 x 10 to the sixth per ANSI/ESD STM 97.1 with conductive footwear (meets or exceeds recommended guidelines of ANSI/ESD S20.20) |
| Largo |
Presto |
 |
 |
*Custom sizes are available.
Call StaticWorx at 617-923-2000 or
for pricing and lead times.
Request Samples
Specifications
